When I began sewing, I had little to no idea what it took to maintain my sewing machine. I thought that a needle stayed in your machine until it broke, then you replaced it with whatever you had on hand. Within two months of purchasing my Bernina 440 QE, I ran to my local dealer in a panic. I had accidentally moved the needle plate and disrupted the felt-like rug that surrounded my feed dogs.
Imagine my dealer’s surprise when I asked if she could order me a new one: turns out it was not a felt-like rug—it was actually an accumulation of thread and fabric lint! It was from then on that I made it a point to clean and maintain my machine regularly to keep it in great running condition (and felt-rug-free!).
TIP: Make sure to clean your machine after every large project or about 8 hours of sewing.
If you have a needle that has sewn through multiple projects, a machine that has not been cleaned or oiled, or perhaps you haven’t had your machine in for a servicing in some time, then it’s time for some routine machine maintenance and cleaning. Read on for the steps on how you can do it yourself.
What You Will Need
Before we dive in to the “how” part of how to clean and maintain your sewing machine, let’s talk about the “what.” Here’s a list of the supplies I like to have on hand when working on my machine:
Screwdriver. These usually come with your machine.
Small brush. I like to use a 1” inexpensive paint brush from my local hardware store to dust out all those tiny areas. Many machines have a brush included.
Vacuum attachment kit (optional). I purchased my kit at a hardware store—it’s great for getting in tight spaces.
White pearl cotton, cotton balls, and cotton tips.
Magnifying glass. You may find you don’t need one, but I find it helpful for seeing in tiny crevices!
Machine oil. This can be purchased at your local fabric shop. Make sure your oil has not discolored!
Sewing machine manual. If you’ve lost track of your machine’s manual, try checking online. Most manuals can be downloaded now.
Replacement light bulb. If it is one that you are able to replace yourself—some machines need to be serviced to be replaced.
How to Clean Your Sewing Machine
Once you’ve gathered your supplies, you’re ready to start cleaning. The following steps will require you to disassemble your machine, so if you find you’re a bit nervous that you may forget how it goes back together again, try taking photos as you go. Then simply refer back to the photos if you ever have a question while reassembling.
Step 1: Unplug your machine. A very important step!
Step 2: Remove the presser foot and needle. Refer to your manual for the proper way to do so.
Step 3: Remove the throat/needle plate and clean with your brush. Some of them screw off and some remove with a pressure point. You may also find that a set of tweezers is helpful if you have a lint rug around your feed dogs.
Step 4: Remove the bobbin casing and clean with your brush. If there seems to be a bit more lint or is difficult to reach, grab your vacuum kit that I sent you to the hardware store to buy. Some people like to use canned air here, but my service person instructed me never to use it because the air can blow the lint toward the back of your machine, rather than out of it. All that lint will build up like concrete and eventually lock up the components in your machine.
Step 5: Clean any tough spots with alcohol. This is a great time to use some cotton balls or cotton tips and rubbing alcohol to remove any gooey substances that may have accumulated on your machine, like old machine oil.
Step 6: Clean the tension with alcohol. Dip your pearl cotton in alcohol and run it through the tension of the machine. It should run through easily; we are just trying to pick up any left-behind lint. Another way to do this is to use a small fat quarter of fabric (muslin works best) and gently slide it along your tension guide to remove any lint.
Step 7: Remove the head and clean, if accessible. If you have a portion of your head that can be easily removed, now is the time to do it. Use your brush to clean out this area.
NOTE: If this part of your machine has a screw that takes a special tool to remove, leave it be. This should only be accessed by a service professional. (Removing it would void your warranty.)
Step 8: Refer to your manual for oiling. Now let’s now look at your manual for instruction on where to oil your machine. Every machine is different and your specific manual will tell you exactly what parts should be lubricated.
NOTE: You should only use sewing machine oil, which can be purchased at any fabric shop. Always make sure your oil is clear, too! If your oil is yellowed or discolored at all, it will cause your machine more harm because it gets gooey and acts more like an adhesive than a lubricant.
NOTE: Some newer machines do not need oiling. These machines use a synthetic lubricant and are oiled by certified service persons only. Oiling may void your warranty in this case.
Step 9: Replace your light bulb (if applicable). Some machines may need to be serviced to do this. Your manual should let you know either way.
Step 10: Reassemble your machine. Once you are all cleaned up and oiled, it’s time to reassemble your machine. I tend to work backward from the last to the first section that I cleaned. Refer to your manual (or photos if you took some) for help with reassembling.
NOTE: This is also a good time to replace your needle! Once you’ve changed it out, try a couple runs on a scrap of fabric to make sure everything is running smoothly.
Most importantly, take your time and be meticulous. And remember, you will want to clean your machine after every major project, or about 8 hours of solid sewing. Once your machine is cleaned and running smoothly again, using good quality thread, fabric, and needles will also enhance your sewing experience.
Happy quilting (and cleaning)!
Related Links:Sewing Machine TroubleshootingChoosing the Right Sewing Machine NeedlesSewing Machine Maintenance Tips– links to National Sewing Circle websiteTips for Cleaning Your Sewing Machine– links to National Sewing Circle websiteGet in touch! Leave a comment or email email@example.com.
Very good information.
Also helpful- I clean my mascara wands thoroughly and use them to help clean my machine. The bristles grab lint and dust and the end bends to reach tight spots.
Vacuum kit – how do you attach to vacuum cleaner?
This is an excellent article, for both “newbies” and “oldies”. As and “oldie” who uses many different machines, modern and vintage, I’d like to add a little something.
“Newbies” who love and use vintage machines should know that it’s possible to do much of their own servicing. Vintage machines can be opened up more than modern so one can easily oil them everywhere that metal rubs on metal (always one drop only). Belts can be adjusted and replaced, gears can cleaned and re-lubricated. Motors can be tuned-up. Very often, you can find maintenance manuals on the internet which will help this process. There will always be a need for machine techs to fix serious problems, but if I can maintain my vintage machines (I’m a 71-year old retiree), anyone can. I realize that not everyone would want to do this. Still, you can if you choose, it’s just not that difficult and it’s very rewarding.
Great time turn around from placing my order to receiving it
Grateful for this instruction. It is a “god sent”. My mother is a seamstress, designer and dress maker; she has a wonderful machine, but never taught us her trade. With cheap and throw away clothing her craft was undervalued. I hope to revive her machine with these suggestions. Wish me luck.
I did not know about the oil for a sewing machine ! However, l do clean it regularly. I checked my oil AND it’s not yellow ! Thanks for the tip that l didn’t know ! 👍
It caught my attention when you said that your sewing machine must undergo some routine machine maintenance and cleaning if your machine has not been cleaned or oiled for some time. This is something that my husband and I failed to do so the sewing machine that his late mother left for us got corroded and damaged. Now that I am interested in using it, I will be sure to have it repaired by a professional and do your tips moving forward.
Another good tip is always unplug your sewing machine when you are done with it. I recently had my touch screen freeze, this was due to lightening in the area that must have affected our power source. The machine had to have an update re-installed and it works perfectly now, but it’s something that we need to get into the habit of doing.
Kelly Hanson is right about cleaning the bobbin area, because of lints, my singer machine recently got stuck while working on a project. Really helpful article, And to all the readers always oil your machine.
Good tips did not know this
cleaning the brother cs6000i sewing machine; I was unable to unscrew the plate; they were very tight, but I was able to remove the other and the bobbin came out easily so that I was able to clean under it, as well. I use my machine almost daily, so this tip was very helpful. The next time I take it in for full cleaning, I will ask him to not tighten as much, so that I can remove for cleaning in the interim. My machine turned out to be an excellent choice for $150, and now, that I can clean it periodically myself, that’s a bonus! Thanks for the info.
I have otomatic with ambroidary. In this machine some problems like footsteps ( how movies clothes forward it’s doesn’t work I need clothes moove by self my hands. Also threade come much more in down side from bobbin so I can’t sawing
Dear Anjna Soni,
Thank you for your patience. In response to your question.
In terms of your fabric not moving under the foot- you may need to raise or lower your feed dogs. If you are wanting to move the fabric by hand without the machine doing it for you, you will need to lower the feed dogs. If you want the fabric to automatically feed through the machine you will need to raise them.
In terms of your thread issue- it sounds like your tension is off. If your thread is appearing on the underside of the fabric more, the bobbin tension is too tight and if the thread is appearing more on the top of the fabric the needle tension is too tight.
National Quilters Circle
Send me more info on how to use sewing machine
Thank you for contacting us. Do you have a specific question that I can forward to our experts? Or you can browse our web site at http://www.nationalquilterscircle.com and do a search by using the search window.
National Quilters Circle Video Membership
Appreciated the cleaning and maintenance tips. Most I knew from years of sewing but found some tips for my new machine as well. Thanks for sending.
I have gotten into the habit of cleaning the bobbin area with every bobbin change. A swipe or two around the area with a cotton swab goes a long way to keeping the area clean
I am grateful to you for sharing some steps on how to clean your sewing machine. It sure looks pretty easy maintaining one especially if you’re the type who cares a lot about your possession. I actually have a unit that is currently missing a vital part or component. I’ll make sure to do some research and check to see if there are parts available for purchase online. Thanks.
Thank you so much.Your advice is very helpful.
Want to learn more
Very nicely written & informative article. Thank you from a prolific needle person with multiple sewing machines.
Thank you for a very helpful article on cleaning and maintain your sewing machine.
Can you show how to clean and maintain a phaff 4!
This post contains the most effective and wanted solutions. I like this as I have learned about sewing machine maintenance.